WPM® SEALING ELEMENT 175R (3 x 7,5m)
The WPM® SEALING ELEMENT 175R is a metal-sheet waterstop.
WPM® SEALING ELEMENT 175R is used to waterproof construction joints against pressurized water in various below-grade reinforced concrete structures - for example, floor-to-wall, wall-to-wall, floor-to-floor, and wall-to-ceiling. The most common use areas are parking houses, water tanks, etc.
One side of the steel sheet is coated with a special mineral coating to ensure good adhesion to concrete.
- Special coating, elastic, not reactive with water
- The mineral coating turns homogeneous with concrete
- Can be installed directly into the fresh concrete
- Can be installed with installation fixers
- Easy to connect with deformation PVC joint tapes
- Officially tested at Taltech University - N° 372-A/19
- Watertight against pressurized water up to 2,4 bar
- Made in Estonia
Packing: box 3 pc x 7.5 m
Pallet: 42 boxes
Shipping & Returns
Shipping & Returns
We ship worldwide. The shipment form will depend on your quantity and order weight.
The shipping cost and shipping options will be chosen after submitting the order.
Easy to apply
Preparation of surface:
WPM Sealing Element 125L will be installed in the middle of the construction joint on top of reinforcement steel. Side with mineral coating is placed to opposite to the water pressure side.
Place the jointing flange on the upper reinforcement rods and attach the binding wire through the holes on the edge of the sheet to the reinforcing rods. Make sure that the joint is at least 3 cm deep within the casting structure (max. half of the width of the selected tape). Next, place the sheet so that the top of the sheets is 10 cm above the cover.
Applying the element:
Apply glue stripe in the middle of the overlap, press the tape firmly over the cover and secure it with the joint clips provided. Use the fixing glue in the kit to achieve a proper joint. Installation may vary by area of use, in case of doubt, ask for further information.
WPM Sealing element coat cover is resistant to many chemicals, if necessary, ask for additional information.
Integral Waterproofing Solution
For below-grade cast-in-place concrete structures.
Using metal-sheet waterstops and crack inducer profiles with crystalline waterproofing admixture in concrete