• WPM Sealing Element 80R
  • WPM Sealing Element 80R
  • WPM Sealing Element 80R
  • WPM Sealing Element 80R
  • WPM Sealing Element 80R
1 6

WPM®

WPM® SEALING ELEMENT 80R (4 x 7,5m)

€220,00 EUR (€7,33 EUR/m)
€220,00 EUR
Sale Sold out
Shipping calculated at checkout.
coating

WPM® SEALING ELEMENT 80R is a metal-sheet waterstop.

WPM® SEALING ELEMENT 80R is used to waterproof construction joints against pressurized water in various below-grade reinforced concrete structures like parking houses, water tanks, etc.

One side of the steel sheet is coated with a special mineral coating to ensure good adhesion to concrete.

  • Special coating, elastic, not reactive with water
  • The mineral coating turns homogeneous with concrete
  • Can be installed directly into the fresh concrete
  • Can be installed with installation fixers
  • Easy to connect with deformation PVC joint tapes
  • Officially tested at Taltech University - N° 372-A/19
  • Watertight against pressurized water up to 2,4 bar
  • Made in Estonia

Packing: box 4 pc x 7.5 m 

Pallet: 60 boxes

Use

WPM® SEALING ELEMENT 80R is used to waterproof construction joints like floor-wall, wall-wall, floor-floor, and wall-ceiling, against pressurized water up to 2.4 bar. 80R can be used in various below-grade reinforced concrete structures like parking houses, water tanks, areas of changing water levels, cast-in-place concrete, and precast unit constructions.

Specifications

- Steel material: galvanized steel
- Steel sheet height: 125 mm
- Steel sheet thickness: approx. 0,7 mm
- Steel sheet length: 7,5 m
- Special coating: mineral coating
- Thickness of complete sheet: approx. 1,7 mm
- Color: silver/grey
- Temperature resistance: -35oC – +75oC
- Working temperature: no limi

Delivery form:
- Box: 3 x 7,5 m detail, joint clips, fixing glue
- Storage 36 month in cool and dry conditions and original package.

Technical Files

Shipping & Returns

We ship worldwide. The shipment form will depend on your quantity and order weight.

The shipping cost and shipping options will be chosen after submitting the order.

Easy to apply

Preparation of surface:
WPM Sealing Element 125L will be installed in the middle of the construction joint on top of reinforcement steel. Side with mineral coating is placed to opposite to the water pressure side.

Place the jointing flange on the upper reinforcement rods and attach the binding wire through the holes on the edge of the sheet to the reinforcing rods. Make sure that the joint is at least 3 cm deep within the casting structure (max. half of the width of the selected tape). Next, place the sheet so that the top of the sheets is 10 cm above the cover.

Applying the element:
Apply glue stripe in the middle of the overlap, press the tape firmly over the cover and secure it with the joint clips provided. Use the fixing glue in the kit to achieve a proper joint. Installation may vary by area of use, in case of doubt, ask for further information.

WPM Sealing element coat cover is resistant to many chemicals, if necessary, ask for additional information.

Integral Waterproofing Solution

For below-grade cast-in-place concrete structures.

Using metal-sheet waterstops and crack inducer profiles with crystalline waterproofing admixture in concrete